Why we add stearin
Pure paraffin melts at a relatively low temperature and shrinks noticeably as it cools, which makes it harder to release from the mould and can leave an uneven surface. Stearin (vegetable or animal stearic acid) raises the melting point, tightens the candle’s structure and helps the mould release the candle more cleanly. It’s usually one of the first additives producers test when switching paraffin suppliers or mould types.
Typical starting points by use case
There is no single “correct” number. The right ratio depends on the paraffin type, the mould and the result you’re after. As a starting point for your own testing:
- Pillar candles: a higher stearin percentage, for a firmer surface and easier release.
- Container candles: a lower percentage, or none, depending on the melt profile you want.
- Decorative / cast candles: adjust gradually upward until the mould detail holds consistently.
What to watch during testing
Any change to the ratio also affects pouring temperature and cooling time, not just hardness. It helps to change one variable at a time, ratio first, then pour temperature, and to keep notes per batch, especially if you’ve switched raw material sources, since different paraffin batches don’t always behave identically.
