Why the pump needs regular checks
The pump runs continuously with molten wax at high temperature, so wear on seals and internal components is normal over time. The problem is that wear usually doesn’t show until it causes a leak or a pressure drop mid-production, which is why a preventive check costs far less than an unplanned line stop.
Checklist before restart
- Seals & gaskets: check for hardening or cracking after a period of inactivity.
- Interior chamber cleanliness: solidified wax residue can clog or wear internal parts.
- Operating temperature: confirm the thermostat holds a stable temperature, without fluctuations that stress the wax and the pump.
- Flow & sound: listen for unusual noise or a pressure drop that could indicate early wear.
Seasonal shutdown
If the line will sit idle for an extended period, it’s best to drain the pump fully rather than leave molten wax inside to solidify. Reheating solidified wax inside the pump is one of the most common causes of failure on restart after a pause.
For spare parts or technical support on wax pumps, see our accessories & spare parts or contact us directly.
